10 Photography Beginner Mistakes And How To Avoid Them

Toronto wedding photographer team will look at the top ten photo blunders that photographers make, as well as how to avoid them.

1. Forgetting to Reset Settings

It’s an excellent concept to play with various settings and be creative in order to get a great photo. In certain cases, it is necessary to change the shutter speed or other settings in order to fit the environment’s lighting conditions.

There’s nothing worse than discovering your one-of-a-kind opportunity was lost because you didn’t reset the settings after playing around with them.

Solution

Toronto wedding photographer team recommend to make a practice of resetting the camera’s settings each time you approach a new scenario, allowing you to use the same standard settings each time. These basic parameters may not be appropriate for every shot, but they will at least allow acceptable photos if you need to take a snap fast. You may always adjust them later.

2. Blurry Pictures

Beginners’ photographs are frequently blurry. What’s the use of capturing a shot of tree-ripe oranges if you can’t even tell what you’re looking at? Rather than resembling citrus marmalade, as seen in the photo,

Wedding photographer Toronto team state that the problem is exacerbated when these photographers are unaware of the reason behind their poor performance. There are a variety of reasons why photos might be blurry. The exposure time was too short, resulting in blurred images; the ISO was too high; not using a tripod to keep the camera steady or the subject moving were all factors.

Solution

There are two main things you need to look out for; first and foremost, make sure enough light is reaching the camera so that the captured image is clear. This may be done by dividing your effective focal length by one to obtain the minimum shutter speed required for the shot with your 70mm lens. You may also employ flash to help enhance the picture.

3. Not Paying Attention to Ambience

A photographer quickly goes outside to shoot photographs for the pure enjoyment of it. Shooting at a rapid rate of 100 or more pictures per hour, and feeling impressed by their newly acquired expertise. Doesn’t this sound familiar?

It’s critical and one of the most prevalent mistakes made by novice photographers is to ignore external factors like as lighting, time of day, and other weather-related variables. Some people try to get a shot of a mountain lake at noon in order on their work to be comparable to Professionals.

Solution

There’s nothing to be concerned about. Do go on photo-taking expeditions; this will get you used to your camera and help you plan for greater trips. Once you’ve gotten rid of your bulk production habits, Wedding photographer Toronto team recommend to aim for high-quality goods instead than quantity. Consider the atmosphere, ask yourself questions, and see whether the lighting is correct.

4. Choosing the Wrong Lens

The camera lens is the eye of the camera; without the proper lens, you won’t get what you wanted. So in a nutshell, without suitable lenses, you won’t be able to take photos that you want. The technical jargon associated with camera lenses confounds novices, nevertheless, without understanding the fundamentals, you will never be able to choose the best lens.

Solution

The first thing to do is comprehend the features of different lenses. A wide-angle lens, for example, enables you to catch more background in your photos. It has a field of view ranging from 75° to 85° and it’s good for shooting interiors or landscapes. On the other hand, a telephoto lens will have far less magnification and you should use it if your subject is far away.

While a wide-angle lens can help you to take better pictures indoors, it’s not the best option for portraits. A telephoto lens does a great job with portraiture, but its wide aperture means that there will be a loss of background sharpness.

5. Adjusting Exposure Incorrectly

If you want your photographs to turn out the way you want them, Wedding photographer team believe getting the exposure right is critical. This is something that many beginning photographers struggle with. The images are generally underexposed (dark and shadowy) or overexposed (bright and vivid). Both can reduce the image’s detail considerably.

The camera meter gets the exposure incorrect in some cases due to its desire for all tones to average out at 18% grey (mid-grey tone), which usually works out correctly.

Solution

The best approach to deal with worry of exposure is to understand what causes them. Yes, you were correct in assuming it was the quantity of light that reached the camera’s sensor.

Inconsistent Exposure: If your images are darker than the subject, they are underexposed, indicating that insufficient light is getting to the camera. In such instances, +/+ the exposure on your DSLR in half-step increments until you discover a good one.

Overexposed Images: A brighter image than usual is caused by having too high a shutter speed that allows in more light into the camera. Reduce (-) exposure by half a stop at a time until you discover one that appears ideal.

6. Setting Incorrect White Balance Setting

White balance, in its many forms, is one of the most essential components of photography. However, they are also one of the least-understood concepts. Simply stated, a white balance controls how genuine colors appear in an image. The lovely blue sea would turn out to be green if you applied incorrect white balance settings.

Many newcomers to photography are perplexed as to why their photographs don’t represent the true hues they saw and attempted to capture.

Solution

The White Balance Mode on a typical DSLR camera is called Auto-White Balance (AWB), Daylight, Shade, Cloudy, Tungsten, Fluorescent, Flash, Temperature, and Custom.

Each of the different modes is based on a distinct color temperature, ranging from 1000K of a Candle Flame to 15000K of a Brilliant Blue Sky – in other words, the hotter the light source, the warmer it is.

While the AWB does an excellent job capturing accurate colors in broad daylight – you’ll have photographs that are way too warm when this mode is utilized indoors, especially with Tungsten lighting.

7. Incorrect Adjustment of Contrast

Wedding photographer team state that understanding what contrast truly is is vital since it affects the details of an image and therefore its importance to get it correct. The difference between dark and light is known as contrast.

Principally, there are two types of contrast: tonal contrast and color contrast.

Tonal Contrast refers to the difference between black and white, as well as all the shades of grey in between. High, Low, and Normal are common terms used to describe these tones.

A High Tone photograph is one with little or no middle grey tones in it. A Low Tone photograph has no distinct highlights or shadows. A normal photograph has a balance of high and low tones, including white, black, and mid-grey tones.

In the world of color, contrast is a technical term that refers to how colors clash or work together. On the other hand, Color Contrast focuses on how colors interact with each other. sunny days produce photographs with too much contrast, making them darker than the actual thing.

Solution

If the photos are having a hard time balancing contrast, use flash to try and brighten the darker regions. Try under-exposing the photograph by one or two stops and see if that corrects the contrast.

If you’re getting low contrast, make sure the focus mode is correctly adjusted; incorrect focus may cause low contrast photos. In addition to this, try raising the exposure setting a bit until you get the desired results.

8. Having a Wrong Composition

When it comes to composition, there are no right or wrong answers. Every individual has a unique viewpoint on situations, which is what makes everything so diversified. A decent composition, on the other hand, is one that captures a scenario in such a way that the picture becomes an awe-inspiring work of art that engages the audience.

The definition of composition is fuzzy; nevertheless, experts do concur that a picture should be able to tell the tale correctly – whenever your image fulfills this aim, you’ve got the composition correct. So in conclusion, composition refers to achieving an equilibrium and flow.

Finding a good composition that succeeds in attracting consumers may be tough for novice photographers, and there are a few methods to vastly enhance your abilities.

Solution

The Rule of Thirds is one of the most well-known ideas in photographic composition, and it may assist you produce interesting and balanced photographs.

The Rule of Thirds states that when you divide an image into thirds both horizontally and vertically, with each third featuring a main section or subject in the photograph.

When you’re trying to place points of interest in your shot, try placing them on the intersections between these lines rather than at their ends. This will create more tension in the image and make it more interesting.

Similarly, try to avoid placing the main subject in the very center of a photograph. Doing so will cause an instant lack of interest from viewers.

9. Having a Flash Too Bright or No Flash At All

The use of a camera’s flash is one of those things that even experienced photographers struggle with. Flash usage is one of the most frequent blunders that individuals make. This is due to a lack of understanding about when to utilize the flash. A good, properly-timed flash may open up a slew of new possibilities for you.

Flash is essential, especially in low-light situations. Flash can also be utilized to enhance picture quality in a variety of circumstances. Fill-flash instances, where the background is brighter than the subject in focus, are among them. It may also be used to illuminate an area or capture a moving object in low light.

Solution

Experiment with your flash and observe the effects you want to achieve. Experiment indoors and outdoors to see how the flash affects your photos. The nicest thing about photography is that while you’re shooting, you have the opportunity to learn by analyzing each shot and considering alternate possibilities that might have improved the final product.

When flash is used, there are two sources of light, as we previously said, and it may affect the overall exposure of the photo. This is when flash exposure compensation comes in handy. Flash exposure compensation allows you to manually alter the quantity of flash that illuminates the subject without changing the camera’s aperture or shutter speed. This is an excellent way to capture photos that would otherwise be difficult to take.

10. Shooting in the Wrong Focus Mode

Thanks to today’s sophisticated picture editing software, a lot of things in an image may be adjusted even after you’ve captured them. This is not true, however, with the focus. Many novice photographers make this mistake because they are unfamiliar with the focus modes.

The focus mode must be set correctly to ensure that the subject and its movement are kept in focus.

Solution

To be able to properly utilize the different focus modes and have focused results, it is important to have a fair understanding of these modes. These modes may look daunting to you, but they aren’t as complex as they seem.

The three types of focus modes are the One Shot (AF-S), AI Servo (AF-C) and AI Focus (AF-A). Once you understand what each of these modes do, you’ll be more confident in your photography skills.

The One Shot (AF-S) mode is the simplest of all three. It is designed to focus only for one shot. Use this mode when your subject is not moving; the camera only focuses when the shutter button is pressed halfway. The camera will have be refocused every time you move it.

It is recommended that this autofocus mode be used by beginner photographers who are trying to get familiar with their new DSLR cameras.

The AI Servo (AF-C) is also commonly referred to as continuous focus because it will continue focusing even when the shutter button has been partially depressed, allowing adjustments in between shots.

This mode should be used when the subjects are moving, such as at sporting events or moving vehicles. The camera’s focal lock cannot be used to recompose a shot in this mode.

The AI Focus (AF-A) is understandably the least understood among all these modes. In essence, it is a combination of the above two modes. If there’s little or no movement detected, the camera will act as if it’s in a One Shot mode, while allowing use of focal lock feature.

If the camera detects considerable amounts of motion, it starts functioning as if it was in the AI Servo mode to track the moving subject.

how much does a wedding cost?

Toronto Wedding photographer

Welcome to Focus Photography, we are a team of Toronto Wedding Photographers.

We specialize in creative, timeless wedding photography and cinematography with a modern and candid appeal.

We are best known for our creative approach to composition, non invasive style of documenting natural moments, flexibility in package customization and top notch dedication in customer service.

Since our inception in 2015, we have captured hundreds of weddings worldwide.

For each of the weddings, we strive to produce natural candid photography, with precision attention to details, companied by cinematic storytelling.

Since 2015, we have been servicing our wedding photography and wedding videography work in Greater Toronto Area, Ontario.

Our studio is based in Toronto, by Markham Road and Mcnicoll.

We are honoured to be a leader in the Toronto Videography industry.

By 2019, we have been named as top wedding photographers and videographers on wedding wire, even featured on 500px.  We are honoured and proud that our work has also been featured in Wedluxe, Pop Sugar, WPIC, Gay Wedding Mag, Elegant Wedding, Aisle Memories, Hey Wedding Lady, Modwedding, Brides and Weddings, Style Me Pretty Contributor via Lovely Find, Inspire Bride. 

Read View reviews: in  
Book a virtual consultation

focus

Micro Wedding Promotion

Small Intimate Weddings

Only $1200